Tables in satin finish

Work in polished satin finish iron.Processing of raw iron from single 35 × 8 single flat bars with various steps can achieve satin glossy effects by removing the calamina;Then helping us from a calender we get perfect circles where they will be placed together with the leg construction to be welded to tig. All rubbed again to be passed to transparent paints that enhance the lines of the satin

P_20161220_093942-300x169 Tables in satin finish P_20161220_114034-169x300 Tables in satin finish

Blacksmith and machinery

There was a time when the manual arts made her mistress ; a time when the blacksmith was one of those people born to make weapons ( swords , spears , shields , etc . ) , one of those people who inherited the job from his predecessors and proudly carried on the craft making it better and better . Then , the onerous job of building weapons has gone to the great chain of multinational corporations and the smiths , they were reinvented in handicrafts of all kinds of items , from furnishings to be shown at the gate to defend themselves ; but as it is defined prestigious it has always been hard work , undervalued and now , alas , also under paid. this figure a little ‘ for the industrial evolution , a bit ‘ for SO-CALLED crisis is disappearing and with a lamp , in little traditions of the country , you still can find some.

Incontrovertibly to the dexterity of the blacksmith , always dirt in the midst of his irons , has developed the figure Printer , a result of a race to industrialization , which led to the creation of machinery ( such as hydraulic presses ) , able to copy to mold certain metal parts for the daily requirement . This new figure emerged after centuries of work incontrovertibly acquitted and only the blacksmith . A figure created with the advent of industrialization undisputed ; a figure created to use machinery that assottigliassero pieces of iron to the point of use to divide , cover , build , sheet metal so thin , constituted by the use of iron and other alloys , which are brought together in machinery that , through the pressurization , them make it thin by using the commercial requirements and the utility demand.

A job that does not have a ‘soul, like the one the blacksmith still manages to enhance with his work, but it is a mechanical work, which does not pretend to have opinions, but useful for all those people still tied to construction, to gardening, to DIY and any other craft or hobby, can be done with the use of a simple more or less thin metallic slab. Every battle, had his blacksmith. Today has never spoken with harmony of a printer, if not for the ‘utility also produce parts for the automobile industry and of weapons parts. We all remember Excalibur, its legendary power. Definitely haunted but just as surely built and by whom, except by a very skilled blacksmith. I could go on making comparisons inextricable putting the two protagonists of this small article, the necessity and virtue of making art of their work, whatever it is. Obviously praise is never for everyone and is to recognize that mastery of manual skills leads to praise the blacksmith who for thousands of years still stands in our daily lives. Enough praise for a printer you can do it definitely, because the manual dexterity was absorbed by productive mechanisms, to which he as people must resist. Mechanisms that wear out and alienate life compared to existence. Let’s work well whatever it is is the main virtue of all those people who use manual skills, or machines to make our life less strenuous, more graceful, better than as it was in the days of those many wars where the end he was not blacksmiths, grooms and soldiers, but the fibula in search of glory. This also we do today, expressing it through what we are allowed, with our work and our daily lives.

Blacksmith or some printer is not a dilemma, certainly should not become a source of rivalry, of course we have to respect and appreciate them. There are sections that the new industry subtracts all; globalization swallows voraciously what we do, but we must not give way to virtuous assumptions of those who have a feeling in recognizing the usefulness of things for what they are, for what they serve and to give the opportunity to move forward, always. Blacksmith or printer is a dispute that can not ragionarsi on paper, but must increase its value to what everyone is in their own living. desired choices, induced choices, constraints or replicate, each has his life is make the responsible choice or not and, while we are here to tell what we believe they are, these people go on to do what they do best: the their work. Now, if I may on the edge of my soliloquy, I would like to express my great appreciation to those two categories of workers who, despite everything, in the interweaving of this modernity, where everything is swallowed by technology, resist upright weatherproof every single day, showing tenacious and courageous, to continue to develop tools, tools and components that we all use, without even realizing it every single day that goes by in our everyday life.

Items of furniture in wrought iron

cats Items of furniture in wrought iron

Objects Wrought iron furniture,

items created in a completely handcrafted from design to construction to the paint finish. All this to give life to this day Italian craftsmanship where more and more we get closer to an industrial globalization.

These small items add a touch of elegance and originality to the rooms where there is laid. Customizing your room is a great way to furnish with care their personal taste to feel more at ease.

Ask for a unique and personalized.

 

 

Identify the real wrought iron

Today keep up the very hectic society we are losing the value of work done by hand as the art of wrought iron handed down for centuries for the construction of metal works.

Today this art is experiencing a major injustice like the fake Made in Italy of our valued products worldwide, such as wrought iron faux suffered in the global market with much lower prices by using inferior materials or by copying with the press machinery work artistic blacksmith.

Make sure that the iron used to be full and not tubular. Some processes can not be realized in solid iron which is definitely the most valuable and solid iron can not be forged.
And ‘why I write to remind some basic tricks to recognize if an object is really made of wrought iron using the forge and the hammer accurate shots by modeling the material on’ anvil or with folds made by machines and presses.

 

Make sure that the iron used to be full and not tubular. Some processes can not be realized in solid iron which is definitely the most valuable and the tubular iron can not be forged.

Handmade beds, decorations (snails, swirls and joints, etc.). They occur slightly different from each other, while in the industrial products are all the same. These differences represent the amount of craftsmanship, are synonymous with quality and guarantee to purchase a ONE.

The joints between the elements of the bed should not be soldered. In ancient times, before the arrival of the weld, each joint was made with the riveting, which involved the use of rivets, and stripes, and these are the techniques that are still used in the craftsmanship of a wrought iron bed. As these processes are very long and therefore expensive, in the industrial processing of the bed it is preferred to resort to welding, which significantly reduces the price, but also the quality of the product. • The perception of the single piece: the different elements of wrought iron, once assembled, must appear as a single body, in which you do not recognize the change from an iron to another, not only for the treatment of joints, but also ironed parts .With these simple steps you will be able, even if you are not experienced locksmiths to recognize the real wrought iron, so you’ll be able to give the right value to the finished piece.

Railings of wrought iron art security

Railings of wrought iron art security.

Nowadays more and more often we wonder if we are really safe in our house, trying to compare the many kinds of methods to lock down our home. I am certainly not here to say which is the best one from the other, but I can definitely say that more deterrents you bring and harder will be the life of the robber if he were trying to get into our house.

Definitely a traditional method and always very effective because no malfunction, are the iron railings to put as protection in all possible entrances to the house. You …. I admit even I still doing this job I was a bit skeptical at seeing large railings to prison style window, they definitely give a sense of protection and discourage criminals but by being there at home can give a sense of oppression, of course when it comes to fixed railings with regular irons straight.

Fortunately, over the years we were able to find a wide variety of solutions to skip this type of problem and satisfy even the most demanding customer who did not feel oppressed at home.

Today we are able to offer products that can give maximum safety in both fixed grids than in furniture to a door or double hollow bars in Florence node or the vast variety of both color drawings of integrating well into the architectural facade where Vera laid.

All this to tell you that today you can stand safely with style, feeling more in a protected home but original in every detail by choosing custom grids depending on your taste.

Identify the real wrought iron

Today keep up the very hectic society we are losing the value of work done by hand as the art of wrought iron handed down for centuries for the construction of metal works.

Today this art is experiencing a major injustice like the fake Made in Italy of our valued products worldwide, such as wrought iron faux suffered in the global market with much lower prices by using inferior materials or by copying with the press machinery work artistic blacksmith.
Make sure that the iron used to be full and not tubular. Some processes can not be realized in solid iron which is definitely the most valuable and solid iron can not be forged.

And ‘why I write to remind some basic tricks to recognize if an object is really made of wrought iron using the forge and the hammer accurate shots by modeling the material on’ anvil or with folds made by machines and presses.

• Make sure that the iron used to be full and not tubular. Some processes can not be realized in solid iron which is definitely the most valuable and the tubular iron can not be forged.

Handmade beds, decorations (snails, swirls and joints, etc.). They occur slightly different from each other, while in the industrial products are all the same. These differences represent the amount of craftsmanship, are synonymous with quality and guarantee to purchase a ONE.

• The joints between the elements of the bed should not be soldered. In ancient times, before the arrival of the weld, each joint was made with the riveting, which involved the use of rivets, and stripes, and these are the techniques that are still used in the craftsmanship of a wrought iron bed. As these processes are very long and therefore expensive, in the industrial processing of the bed it is preferred to resort to welding, which significantly reduces the price, but also the quality of the product. • The perception of the single piece: the different elements of wrought iron, once assembled, must appear as a single body, in which you do not recognize the change from an iron to another, not only for the treatment of joints, but also ironed parts .With these simple steps you will be able, even if you are not experienced locksmiths to recognize the real wrought iron, so you’ll be able to give the right value to the finished piece.

 

Cubism classic stool shapeitaly

Stool designed and built by shapeitaly , objects created using the style of Cubism .

Obtain a drawing of geometric shapes , such as squares and a half round until you come to get the object made of paper which is a stool with more geometric shapes . This object of the stool was designed and built after the smoke table created with the same conception of Cubism to interpret a mobile with geometric shapes , giving the object a minimal and elegant way . This stool was taken with the creation of squares up to the cubes. The object is a great piece of furniture for the rooms with modern design , rather where it enhances the originality of the product with the most special steel chain that runs down the center of the first cube to support another shiny brass square shining in depending on where it is struck by light.

Cubism classic stool shapeitaly

Stool designed and built by shapeitaly, objects created using the style of cubism. Getting a design of geometric shapes such as squares and half-round until you come to get the object made of paper that is a stool with more geometric shapes.

This object of stool is designed and built after the smoke created table with the same conception of cubism in order to interpret a piece of furniture with geometric shapes, giving the object a sense minimal and elegant.

This stool has been accomplished by creating squares until you get to the cubes. The object is a great piece of furniture for rooms with a modern design rather where it enhances the originality of the product with the most special steel chain running down the center of the first cube supporting another square of polished brass that shines in second of where it is struck by light.

How to identify the real wrought iron

Today keep up the very hectic society we are losing the value of work done by hand as the art of wrought iron handed down for centuries for the construction of metal works. Today this art is experiencing a major injustice like the fake Made in Italy of our valued products worldwide, such as wrought iron faux suffered in the global market with much lower prices by using inferior materials or by copying with the press machinery work artistic blacksmith. Make sure that the iron used to be full and not tubular. Some processes can not be realized in solid iron which is definitely the most valuable and solid iron can not be forged. And ‘why I write to remind some basic tricks to recognize if an object is really made of wrought iron using the forge and the hammer accurate shots by modeling the material on’ anvil or with folds made by machines and presses.

• Make sure that the iron used to be full and not tubular. Some processes can not be realized in solid iron which is definitely the most valuable and the tubular iron can not be forged. • Handmade beds, decorations (snails, swirls and joints, etc.). They occur slightly different from each other, while in the industrial products are all the same. These differences represent the amount of craftsmanship, are synonymous with quality and guarantee to purchase a ONE.

• The joints between the elements of the bed should not be soldered. In ancient times, before the arrival of the weld, each joint was made with the riveting, which involved the use of rivets, and stripes, and these are the techniques that are still used in the craftsmanship of a wrought iron bed. As these processes are very long and therefore expensive, in the industrial processing of the bed it is preferred to resort to welding, which significantly reduces the price, but also the quality of the product.

• The perception of the single piece: the different elements of wrought iron, once assembled, must appear as a single body, in which you do not recognize the change from an iron to another, not only for the treatment of joints, but also ironed parts .With these simple steps you will be able, even if you are not experienced locksmiths to recognize the real wrought iron, so you’ll be able to give the right value to the finished piece.